ssid

This is another brain dump of ideas.

So, part of me wants to consider the idea of using amateur radio as a transmission mechanism for 6LoWPAN.  The idea being that we use NET/ROM and AX.25 or similar schemes as a transport mechanism for delivering shortened IPv6 packets.  Over this, we can use standard TCP/IP programming to write applications.

Protocols designed for low-bandwidth constrained networks are ideal here, so things like CoAP where emphasis is placed on compact representation.  6LoWPAN normally runs over IEEE 802.15.4 which has a payload limit of 128 bytes.  AX.25 has a limit of 256 bytes, so is already doing better.

The thinking is that I “encode” the call-sign into a “hardware” address.  MAC addresses are nominally 48-bits, although the IEEE is trying to phase that out in favour of 64-bit EUIs.  Officially the IEEE looks after this, so we want to avoid doing things that might clash with their system.

A EUI-48 (MAC) address is 6-bytes long, where the first 3 bytes identify the type of address and the organisation, and the latter 3 bytes identify an individual device.  The least significant two bits of the first byte are flags that decide whether the address is unicast or local, and whether it is globally administered (by the IEEE) or locally administered.

To avoid complications, we should probably keep the unicast bit cleared to indicate that these addresses are unicast addresses.

Some might argue that the ITU assigns prefixes to countries, and these countries have national bodies that hand out callsigns, thus we could consider callsigns as “globally administered”.  Truth is, the IEEE has nothing to do with the process, and could very legitimately assign the EUI-48 prefix 56-4b-34 to a company… in that hypothetical scenario, there goes all the addresses that might represent amateur operators stationed in Queensland.  So let’s call these “locally administered”, since there are suffixes the user may choose (e.g. “/P”).

That gives us 46-bits to play with.  7-bit ASCII just fits 6 characters, which would just fit the callsigns used in AX.25 with enough room for a 4-bit SSID.  We don’t need all 128 characters though, and a scheme based on DEC’s Radix50 can pack in far more.

We can get 8 arbitrary Radix50 characters into 43 bits, which gives us 3 left over which can be used as the user wishes.  We’ll probably call it the SSID, but unlike AX.25, will be limited from 0-7.  The user can always use the least significant character in their callsign field for an additional 6 bits, which gives them 9 bits to play with.  (i.e. “VK4MSL-1″#0 to encode the AX.25 SSID “VK4MSL-10”)

Flip the multicast bit, and we’ve got a group address.

SLAAC derives the IPv6 address from the EUI-48, so the IPv6 address will effectively encode the callsigns of the two communicating stations.  If both are on the same “mesh”, then we can probably borrow ideas from 6LoWPAN for shortening that address.